Smart-home design for contractors and design offices in Turkey

Infrastructure first, brand second.

Smart Mimar designs the smart-home infrastructure, the technical specification and the system choice for residential projects. We sell no devices and install nothing. The drawings and the specification stay with you; the brand decision stays yours.

  • No hardware sales, no commission
  • Architect-signed, systems-literate
  • KNX, DALI, wireless and hybrid
Sample flat, layered infrastructure plan SM-01 · 1:50 · rev C
--:--
Living Kitchen Balcony Hall Bed 1 Bath Bed 2 Panel

Walk into a room or hover a device

Illustrative plan. The flat runs on Istanbul time. Your cursor is a person: walk the rooms, scrub the clock.

Who we work for

Three clients, three different needs. One principle in all of them: design from us, brand decision from you.

Contractors and urban-renewal developers

You want to sell units as "smart-home ready". The integrator quote locks you into one brand, the electrician says "later", and once the plaster is on, it is over.

Pre-plaster infrastructure drawings, conduit and shaft list, technical specification, acceptance test. An infrastructure that works whichever brand you pick.

Infrastructure design and specification (TR)

Architecture and engineering offices

The automation decision for a villa or residence is on the table. The manufacturer offers a "free project" and design authority leaves the office.

KNX, wireless or hybrid decision, room-by-room function list, integrator brief and quote comparison. Design authority stays with the office.

System selection and design (TR)

Manufacturers and system integrators

The product is good; the explanation to the project world is missing. No documents an architect understands, no Revit families, no Arabic technical content.

Technical content, BIM families, project documentation and technical localisation for Arabic-speaking markets. Engineering language, not sales.

Manufacturers and integrators (TR)

Why does smart-home design come “free”?

In Turkey design looks free because its cost sits inside the hardware. Whoever designs also sells. This table shows who sells what.

Manufacturer project supportSystem integratorSmart Mimar
Who pays?The device priceDevice and installation priceYou, with a clear design fee
Brand-neutral?No, own productMostly no, partner brandsYes, by contract
Who keeps the drawings?The manufacturerThe integratorYou, DWG and PDF
Writes a specification?NoRarelyYes, one you can tender
Compares quotes?NoNoYes, against the same specification

Integrators and manufacturers are not our enemy. They install. We keep the design and the specification on your side of the table.

Three services, one principle

Every service ends in a written and drawn deliverable. None involves hardware sales, installation or commission.

SM-H1

Infrastructure design and specification

Contractors, urban renewal, boutique developers

Everything that must be decided before the plaster goes on, in one file. We coordinate with the licensed electrical designer; the signature is his, the infrastructure design is ours.

  • Layered infrastructure plans (power, bus, sensors, lighting, blinds)
  • Conduit, junction-box and shaft list
  • Panel schematic and cable schedule
  • Technical specification (protocol, cabling, testing, documentation, warranty)
  • Acceptance test checklist
Service page (TR)
SM-H2

System selection and design

Architecture and interior offices, villas and residences

KNX, wireless or hybrid for this project? We give the decision with its reasoning. With the room-by-room function list and the integrator brief you collect comparable quotes.

  • Protocol and architecture decision report
  • Room-by-room function and scene list
  • Brand-neutral system concept
  • Integrator brief and quote comparison table
  • Attendance at design meetings
Service page (TR)
SM-H3

Manufacturers and integrators

Turkish manufacturers, KNX Partner firms

We translate the product into the language of architects and design offices. Technical content, BIM families and documentation. Technical localisation for Arabic-speaking markets.

  • Technical articles and application guides
  • Revit families and parameter standard
  • Project documentation and sample specification
  • Arabic technical localisation
Service page (TR)

How does a building become smart?

Five stages. The first three are over before the plaster goes on. Most of our work happens there.

+13.20 +9.90 +6.60 +3.30 ±0.00

01 Shell and core Smart Mimar

When decisions are cheapest

While columns and slabs are poured, there is no smart home yet. But the shaft, the panel niche and the floor distribution are fixed now. A change at this stage costs as little as erasing a line.

Brief and infrastructure decisions

02 Conduit and shaft Smart Mimar

A path left for the future

A conduit runs from every switch box to the panel, from every window to its blind motor. The shaft keeps spare room. An unused conduit is cheap. A missing one is expensive.

Deliverable: conduit and shaft list

03 Cable Smart Mimar

Bus line and mains, on separate routes

The bus line reaches every flat. Every lighting circuit returns to the panel. Every switch box has a neutral. These three rules keep every future brand option open.

Deliverables: panel schematic, cable schedule, specification

The plaster line. After this, changing the infrastructure means breaking walls.

04 Device Integrator

Now the brand is chosen

The plaster is on; the infrastructure is inside the wall. Switches, sensors and actuators go in. The integrator quotes against the specification and programs. The brand is chosen last, when you know the most.

Installation by the integrator, acceptance test by us

05 Life You

The home does its own work

In the evening the blinds close. The hall opens its night path. Bathroom humidity runs the fan. It keeps working when the internet is down. The drawings and project file are yours.

Deliverables: as-built drawings, project file, acceptance report

Working with us

  1. Brief, 30 minutes, free
  2. Written proposal, 24 hours
  3. Design and coordination
  4. Handover and acceptance

What is on the bench?

The person doing this work lives with systems. The Lab page shows the protocols, tools and test rig we use. A workbench, not a showcase.

Protocols
KNX TP and IP, DALI-2, Zigbee, Thread and Matter, Modbus
Software
ETS, Home Assistant, Node-RED, Python
Drawing
AutoCAD, Revit, Rhino and Grasshopper
Testing
Home test panel, KNX line, Zigbee network, sensor rig
Go to the Lab page (TR)
LAN Home Assistant Node-RED · Python KNX IP arayüz · ETS TP 1/1 dim buton perde DALI-2 geçidi Zigbee koordinatör kontak PIR sıcaklık Thread sınır yönlendirici Matter Enerji sayacı Modbus RTU Aydınlatma sahneleri

Smart-home technical specification template

A specification skeleton for residential projects you can tender against. Scope, protocol, cabling, testing and acceptance, documentation, warranty. DOCX and PDF. In Turkish.

  • Nine sections, fillable fields
  • Puts integrator quotes on the same footing
  • No brand names; describes performance and interfaces

Free. In return we only ask which project you will use it on.

Frequently asked questions

Do you sign the electrical project?

No. The author of the electrical project is a licensed electrical engineer. We prepare the smart-home infrastructure design and the specification and coordinate with the designer. Our drawings enter his project as layers.

Manufacturers already give the design for free. Why pay?

A free design is written for one brand and the drawings stay with the manufacturer. Our drawings and specification stay with you, and you can tender to any brand. The fee is smaller than the cost of one wrong brand decision.

Do you install?

No. Installation is done by a system integrator or electrical contractor. We stay on the design, specification and acceptance side, so our advice is never tied to a device sale.

Do you recommend KNX or wireless?

Depends on the project. In multi-unit housing and new builds a wired bus usually wins; in renovations and small projects wireless or hybrid can be the better call. We give the decision in writing, with reasons.

How is the fee set?

Per project, by written proposal. Unit count, repeating types and the deliverables you need decide it. We do not quote per square metre. The first call is free.

Where do you work?

Based in Istanbul. Most design work runs remotely; site visits across Turkey are planned when needed.

Tell us about your project

Stage, unit count and your goal. Written reply within 24 hours.

Write on WhatsApp

+90 XXX XXX XX XX

Email hello@smartmimar.com

Istanbul

Form data is used only to reply to you. KVKK